How to resolve the 'Forwarded ports found' alert | Avast
Skip to main content

Avast Network Inspector alert: Forwarded ports found

This article explains how to resolve the issue if Network Inspector in Avast Antivirus shows the following alert:

  • Forwarded ports found

If you see the alert above after running a Network Inspector scan, we have found that either your router or a Windows PC on your network has open ports, which could allow attackers to remotely access your network and any connected devices. You can verify exactly which port numbers are open via the Network Inspector results screen. Click See how to fix, and check the open port numbers listed under Risks.

Description

Remote access features like Remote Desktop (port 3389) or File and Printer Sharing (port 445) on Windows PCs, when exposed to the Internet through a router's port forwarding, can allow an attacker to connect to the affected PC and install malware by either exploiting known vulnerabilities or guessing your password via a brute-force attack.

Ports 3389 (RDP) and 445 (SMB) are among the most commonly forwarded ports. However, the alert may also flag other ports, such as 80 (HTTP), 443 (HTTPS) or 22 (SSH).

Solution

You need to disable port forwarding via your router settings. Follow the steps in the Disable Port Forwarding section below. Alternatively, refer to instructions to Disable UPnP (Universal Plug and Play) feature on the router.

This section explains how to disable port forwarding on your router.

Select your router brand for detailed instructions:

ASUS

Due to the wide range of different router types offered by Asus, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact ASUS directly.

To configure an ASUS wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your ASUS router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Go to Advanced Settings ▸ WAN ▸ Virtual Server / Port Forwarding.

4.

Choose your preferred option below:

  1. Disable port forwarding: under Basic Config, select the green (ON) slider so that it changes to black (OFF).
  2. Disable a single port forwarding entry: on the Port Forwarding List, locate any entries that list port 135, 445, or 3389 under External Port. Select the delete icon next to each relevant entry.
5.

Reboot your router if necessary.

Belkin

Due to the wide range of different router types offered by Belkin, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Belkin directly.

To configure a Belkin wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your Belkin router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Go to Configuration ▸ Security.

4.

Select Single Port Forwarding in the left panel. Check for any entries that list port 135, 445, or 338922 or 23 under External Port. Select Remove next to each relevant entry, then confirm your changes by selecting Save.

5.

Select Port Range Forwarding in the left panel. Under Start ~ End Port, check for any entries with a range that includes port 135, 445, or 338922 or 23. Select Remove next to each relevant entry, then confirm your changes by selecting Save.

6.

Reboot your router if necessary.

Single Port Forwarding

Port Range Forwarding

Cisco

Due to the wide range of different router types offered by Cisco, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Cisco directly.

To configure a Cisco wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your Cisco router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Select Firewall ▸ Port Forwarding ▸ Service Management....

4.

Make a note of the Name that is provided for each entry that lists port 135, 445, or 338922 or 23 under Port Start/ICMP Type/IP Protocol.

5.

Select Firewall ▸ Port Forwarding in the left panel.

6.

Under External Service, locate each Name that you made a note of in step 4. For each relevant entry, untick the box next to Enable.

7.

Confirm your changes by selecting Apply, and reboot your router if necessary.

Due to the wide range of different router types offered by D-Link, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact D-Link directly.

To configure a D-Link wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your D-Link router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Go to Advanced ▸ Port Forwarding.

4.

Check for any entries that list port 135, 445, or 338922 or 23 under TCP Port. For each relevant entry, untick the box in the Status column. Confirm your changes by selecting Save.

5.

Select Virtual Server at the top of the screen. Then, check for any entries that list port 135, 445, or 338922 or 23 under External Port. For each relevant entry, untick the box in the Status column. Confirm your changes by selecting Save.

6.

Reboot your router if necessary.

Huawei

Due to the wide range of different router types offered by Huawei, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Huawei directly.

To configure a Huawei wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your Huawei router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Go to Basic ▸ NAT ▸ Virtual Server.

4.

In the Virtual Server Listing table, make a note of the Rule number that is provided for each entry with a port range that includes port 135, 445, or 338922 or 23 (the range includes all ports between the Start Port and End Port numbers).

5.

Under NAT - Virtual Server, use the Rule Index drop-down menu to select each Rule number that you made a note of in step 4. Select the delete button at the bottom of the screen to remove each relevant entry.

6.

Confirm your changes by selecting Submit, and reboot your router if necessary.

Linksys

Due to the wide range of different router types offered by Linksys, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Linksys directly.

To configure a Linksys wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your Linksys router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Go to Security ▸ Apps and Gaming ▸ Single Port Forwarding.

4.

Locate any entries that list port 135, 445, or 338922 or 23 under External Port. Then, choose your preferred option below for each relevant entry:

  • Delete an entry: select the delete button next to an entry.
  • Disable an entry: select Edit next to an entry. Untick the box under Enabled, then select Save to confirm your changes.

Confirm your changes by selecting Apply.

5.

Select the Port Range Forwarding tab. Under Start ~ End Port, check for any entries with a range that includes port 135, 445, or 338922 or 23. Then, choose your preferred option below for each relevant entry:

  • Delete an entry: select the delete button next to an entry.
  • Disable an entry: select Edit next to an entry. Untick the box under Enabled, then select Save to confirm your changes.

Confirm your changes by selecting Apply.

6.

Reboot your router if necessary.

Single Port Forwarding

Port Range Forwarding

NETGEAR

Due to the wide range of different router types offered by NETGEAR, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact NETGEAR directly.

To configure a NETGEAR wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your NETGEAR router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Go to Advanced ▸ Advanced Setup ▸ Port Triggering / Port Forwarding. Under Please select the service type, select Port Forwarding.

4.

Locate any entries that meet either of the following criteria:

  • Entries that list port 135, 445, or 338922 or 23 under External Start Port.
  • Entries with an external port range that includes port 135, 445, or 338922 or 23 (the range includes all ports between the External Start Port and External End Port numbers).

Select each relevant entry, then select the Delete Service button.

5.

Reboot your router if necessary.

Due to the wide range of different router types offered by TP-Link, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact TP-Link directly.

To configure a TP-Link wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your TP-Link router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Go to Advanced ▸ NAT Forwarding ▸ Port Forwarding.

4.

Locate any entries that list port 135, 445, or 338922 or 23 under External Port. Then, choose your preferred option below for each relevant entry:

  1. Disable an entry: under Status, select the blue (ON) slider so that it changes to white (OFF).
  2. Delete an entry: under Modify, select the trash icon.
5.

Reboot your router if necessary.

TRENDnet

Due to the wide range of different router types offered by TRENDnet, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact TRENDnet directly.

To configure a TRENDnet wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your TRENDnet router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Go to Advanced ▸ Firewall ▸ Virtual Server.

4.

On the Virtual Server List, locate any entries that list port 135, 445, or 338922 or 23 under Protocol, Public Port/Private Port. Then, choose your preferred option below for each relevant entry:

  1. Disable an entry: untick the box under Enable.
  2. Delete an entry: select the red cross icon under delete.
5.

Select Gaming in the left panel. In the Gaming Rule List, check the Ports column for any entries with a range that includes port 135, 445, or 338922 or 23. Then, choose your preferred option below for each relevant entry:

  1. Disable an entry: untick the box under Enable.
  2. Delete an entry: select the red cross icon under delete.
6.

Reboot your router if necessary.

Virtual Server

Gaming

Other routers

Due to the wide range of different router types, we can only provide brand-specific instructions for frequently used routers and general instructions for all other routers. For exact instructions, consult the documentation for your specific router model. For further assistance, contact the manufacturer of your router directly.

Below are links to the support pages for other router brands:
 

Apple | AT&T | Dell | DrayTek | Eero | GL.iNET | Google | MicroTik | Motorola | NEC | Sagem/Sagemcom | Speedefy | Ubiquiti | UniFi | Vodafone | ZyXEL

To configure a wireless router:

1.

From the Network Inspector results screen, select Go to your router settings to open the administration page of your router.

2.

Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).

3.

Find the Port Forwarding settings for your router. These settings are normally in the Advanced or Advanced Setup section. If you do not immediately see the Port Forwarding option, try looking in the following categories:

  • Apps and Gaming
  • NAT / NAT Forwarding / Forwarding
  • Virtual Server
4.

In the table showing your active port forwarding entries, locate any entries that list port 135, 445, or 338922 or 23 under External Port (might also be listed under Port, External Start Port, TCP Port, or similar).

Either delete or disable each relevant entry. If necessary, confirm your changes (select Save, Apply, OK, or similar).

5.

If available, select Port Range Forwarding. In the table showing your active port range forwarding entries, locate any entries with a range that includes port 135, 445, or 338922 or 23.

Either delete or disable each relevant entry. If necessary, confirm your changes (select Save, Apply, OK, or similar).

6.

Reboot your router if necessary.

This section explains how to disable the Universal Plug and Play (UPnP) feature on your router as an alternative security measure to prevent unauthorized devices from connecting to your network. Refer to the steps below:

  1. From the Network Inspector results screen, select Go to your router settings to open the administration page of your router.
  2. Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
  3. The layout and location of the UPnP setting varies depending on the router brand. Generally, look for Advanced Settings, Network Settings, or LAN Settings. Common locations for UPnP settings:
    • Asus: Advanced Settings ▸ WAN ▸ Internet Connection ▸ UPnP
    • Belkin: Utilities ▸ System Settings ▸ UPnP
    • Cisco: Firewall ▸ Basic Settings ▸ UPnP
    • D-Link: Advanced ▸ Advanced Network ▸ UPnP
    • Huawei: More Functions ▸ Network Settings ▸ UPnP
    • Linksys: Administration ▸ Management ▸ UPnP
    • Netgear: Advanced ▸ Advanced Setup ▸ UPnP
    • TP-Link: Advanced ▸ NAT Forwarding ▸ UPnP
    • TRENDnet: Advanced ▸ UPnP
  4. Untick or disable the UPnP option. You may be prompted to save the changes and/or reboot your router for the changes to take effect.
  • Avast One
  • Avast Premium Security
  • Avast Free Antivirus
  • Windows and macOS


Updated on: 12/06/2025

Was this article helpful?

Need additional help?

Contact us
Avast logo
Singapore
For home
For business
For partners
Company
Avast logo © 2025 Gen Digital Inc. All rights reserved.
Privacy policy Products policy Legal Report vulnerability Modern Slavery Statement Do not sell my info Subscription details Cookie Settings