This section explains how to disable remote access via Telnet and SSH on your router (applies if port 22 or 23 is open).
Select your router brand for detailed instructions:
ASUS
Due to the wide range of different router types offered by Asus, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact ASUS directly.
To configure an ASUS wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your ASUS router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Go to Advanced Settings ▸ Administration ▸ System ▸ Service. Perform both actions below:
|
|
4. |
Go to Advanced Settings ▸ WAN ▸ Virtual Server / Port Forwarding. |
|
5. |
Choose your preferred option below:
|
|
6. |
Reboot your router if necessary. |

Belkin
Due to the wide range of different router types offered by Belkin, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Belkin directly.
To configure a Belkin wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your Belkin router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Go to Configuration ▸ Security. |
|
4. |
Select Single Port Forwarding in the left panel. Check for any entries that list port 135, 445, or 338922 or 23 under External Port. Select Remove next to each relevant entry, then confirm your changes by selecting Save. |
|
5. |
Select Port Range Forwarding in the left panel. Under Start ~ End Port, check for any entries with a range that includes port 135, 445, or 338922 or 23. Select Remove next to each relevant entry, then confirm your changes by selecting Save. |
|
6. |
Reboot your router if necessary. |
Single Port Forwarding
Port Range Forwarding
Cisco
Due to the wide range of different router types offered by Cisco, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Cisco directly.
To configure a Cisco wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your Cisco router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Select Firewall ▸ Port Forwarding ▸ Service Management.... |
|
4. |
Make a note of the Name that is provided for each entry that lists port 135, 445, or 338922 or 23 under Port Start/ICMP Type/IP Protocol. |
|
5. |
Select Firewall ▸ Port Forwarding in the left panel. |
|
6. |
Under External Service, locate each Name that you made a note of in step 4. For each relevant entry, untick the box next to Enable. |
|
7. |
Confirm your changes by selecting Apply, and reboot your router if necessary. |
D-Link
Due to the wide range of different router types offered by D-Link, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact D-Link directly.
To configure a D-Link wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your D-Link router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Go to Advanced ▸ Port Forwarding. |
|
4. |
Check for any entries that list port 135, 445, or 338922 or 23 under TCP Port. For each relevant entry, untick the box in the Status column. Confirm your changes by selecting Save. |
|
5. |
Select Virtual Server at the top of the screen. Then, check for any entries that list port 135, 445, or 338922 or 23 under External Port. For each relevant entry, untick the box in the Status column. Confirm your changes by selecting Save. |
|
6. |
Reboot your router if necessary. |
Huawei
Due to the wide range of different router types offered by Huawei, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Huawei directly.
To configure a Huawei wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your Huawei router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Go to Basic ▸ NAT ▸ Virtual Server. |
|
4. |
In the Virtual Server Listing table, make a note of the Rule number that is provided for each entry with a port range that includes port 135, 445, or 338922 or 23 (the range includes all ports between the Start Port and End Port numbers). |
|
5. |
Under NAT - Virtual Server, use the Rule Index drop-down menu to select each Rule number that you made a note of in step 4. Select the delete button at the bottom of the screen to remove each relevant entry. |
|
6. |
Confirm your changes by selecting Submit, and reboot your router if necessary. |
Linksys
Due to the wide range of different router types offered by Linksys, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Linksys directly.
To configure a Linksys wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your Linksys router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Go to Security ▸ Apps and Gaming ▸ Single Port Forwarding. |
|
4. |
Locate any entries that list port 135, 445, or 338922 or 23 under External Port. Then, choose your preferred option below for each relevant entry:
Confirm your changes by selecting Apply. |
|
5. |
Select the Port Range Forwarding tab. Under Start ~ End Port, check for any entries with a range that includes port 135, 445, or 338922 or 23. Then, choose your preferred option below for each relevant entry:
Confirm your changes by selecting Apply. |
|
6. |
Reboot your router if necessary. |
Single Port Forwarding
Port Range Forwarding
NETGEAR
Due to the wide range of different router types offered by NETGEAR, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact NETGEAR directly.
To configure a NETGEAR wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your NETGEAR router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Go to Advanced ▸ Advanced Setup ▸ Port Triggering / Port Forwarding. Under Please select the service type, select Port Forwarding. |
|
4. |
Locate any entries that meet either of the following criteria:
Select each relevant entry, then select the Delete Service button. |
|
5. |
Reboot your router if necessary. |
TP-Link
Due to the wide range of different router types offered by TP-Link, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact TP-Link directly.
To configure a TP-Link wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your TP-Link router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Go to Advanced ▸ NAT Forwarding ▸ Port Forwarding. |
|
4. |
Locate any entries that list port 135, 445, or 338922 or 23 under External Port. Then, choose your preferred option below for each relevant entry:
|
|
5. |
Reboot your router if necessary. |
TRENDnet
Due to the wide range of different router types offered by TRENDnet, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact TRENDnet directly.
To configure a TRENDnet wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your TRENDnet router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Go to Advanced ▸ Firewall ▸ Virtual Server. |
|
4. |
On the Virtual Server List, locate any entries that list port 135, 445, or 338922 or 23 under Protocol, Public Port/Private Port. Then, choose your preferred option below for each relevant entry:
|
|
5. |
Select Gaming in the left panel. In the Gaming Rule List, check the Ports column for any entries with a range that includes port 135, 445, or 338922 or 23. Then, choose your preferred option below for each relevant entry:
|
|
6. |
Reboot your router if necessary. |
Virtual Server
Gaming
Other routers
Due to the wide range of different router types, we can only provide brand-specific instructions for frequently used routers and general instructions for all other routers. For exact instructions, consult the documentation for your specific router model. For further assistance, contact the manufacturer of your router directly.
Below are links to the support pages for other router brands:
Apple | AT&T | Dell | DrayTek | Eero | GL.iNET | Google | MicroTik | Motorola | NEC | Sagem/Sagemcom | Speedefy | Ubiquiti | UniFi | Vodafone | ZyXEL
To configure a wireless router:
|
1. |
From the Network Inspector results screen, select Go to your router settings to open the administration page of your router. |
|
2. |
Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP). |
|
3. |
Find the Port Forwarding settings for your router. These settings are normally in the Advanced or Advanced Setup section. If you do not immediately see the Port Forwarding option, try looking in the following categories:
|
|
4. |
In the table showing your active port forwarding entries, locate any entries that list port 135, 445, or 338922 or 23 under External Port (might also be listed under Port, External Start Port, TCP Port, or similar). Either delete or disable each relevant entry. If necessary, confirm your changes (select Save, Apply, OK, or similar). |
|
5. |
If available, select Port Range Forwarding. In the table showing your active port range forwarding entries, locate any entries with a range that includes port 135, 445, or 338922 or 23. Either delete or disable each relevant entry. If necessary, confirm your changes (select Save, Apply, OK, or similar). |
|
6. |
Reboot your router if necessary. |

