Avast Network Inspector alert: Remote Desktop vulnerability found
This article explains how to resolve the issue if Network Inspector in Avast Antivirus shows the following alert:
- Remote Desktop vulnerability found
Description
Remote Desktop Protocol (RDP), commonly called Remote Desktop, allows you to connect to your PC from any location. If you see the alert above after running a Network Inspector scan in Avast Antivirus, we have found that your PC's Remote Desktop settings are not secure. This is due to an exposed port forwarding rule on your router and disabled Network Level Authentication on your PC.
An attacker could connect to your PC and use known vulnerabilities in Microsoft's Remote Desktop Protocol to execute malicious code, or plant malware. An attacker may also attempt to access protected areas of your PC by repeatedly guessing the password (known as a brute-force attack).
Additionally, if port forwarding is enabled on your router, your PC may be exposed to the Internet, increasing the risk of remote access attempts.
Exposing Remote Desktop Protocol to the public Internet without Network Level Authentication is extremely risky. Even with Network Level Authentication enabled, this practice should be discouraged, as zero-day exploits can emerge unexpectedly.
Solution
Disable the port forwarding rule
To mitigate the risk, it is advisable to access your router's settings and delete or turn off the port forwarding rule that directs internet traffic to your PC. Select your router brand for detailed instructions:
ASUS
Due to the wide range of different router types offered by Asus, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact ASUS directly.
- Enter your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in your browser.
- Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
- Go to Advanced Settings ▸ WAN ▸ Virtual Server / Port Forwarding tab.
- Find the forwarding rule for port 3389 and untick or delete it.
- Save your changes.
Belkin
Due to the wide range of different router types offered by Belkin, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Belkin directly.
- Enter your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in your browser.
- Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
- Go to Configuration ▸ Security.
- Go to Single Port Forwarding or Port Range Forwarding.
- Find the forwarding rule for port 3389 and untick or delete it.
- Save your changes.
Cisco
Due to the wide range of different router types offered by Cisco, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Cisco directly.
- Enter your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in your browser.
- Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
- Go to Firewall ▸ Port Forwarding.
- Find the forwarding rule for port 3389 and untick or delete it.
- Save your changes.
D-Link
Due to the wide range of different router types offered by D-Link, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact D-Link directly.
- Enter your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in your browser.
- Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
- Go to the Advanced tab and select Port Forwarding or Virtual Server.
- Find the forwarding rule for port 3389 and untick or delete it.
- Save your changes.
Huawei
Due to the wide range of different router types offered by Huawei, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Huawei directly.
- Enter your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in your browser.
- Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
- Go to the Advanced Settings tab and select NAT or Port Forwarding.
- Find the forwarding rule for port 3389 and untick or delete it.
- Save your changes.
Linksys
Due to the wide range of different router types offered by Linksys, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact Linksys directly.
- Enter your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in your browser.
- Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
- Go to the Applications & Gaming ▸ Port Range Forwarding.
- Find the forwarding rule for port 3389 and untick or delete it.
- Save your changes.
NETGEAR
Due to the wide range of different router types offered by NETGEAR, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact NETGEAR directly.
- Enter your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in your browser.
- Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
- Go to the Advanced ▸ Advanced Setup ▸ Port Forwarding/Port Triggering.
- Find the forwarding rule for port 3389 and untick or delete it.
- Save your changes.
TP-Link
Due to the wide range of different router types offered by TP-Link, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact TP-Link directly.
- Enter your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in your browser.
- Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
- Go to the Forwarding ▸ Virtual Servers or NAT Forwarding.
- Find the forwarding rule for port 3389 and untick or delete it.
- Save your changes.
TRENDnet
Due to the wide range of different router types offered by TRENDnet, we can only provide general instructions for frequently used models. For detailed instructions, consult the documentation for your specific router model. For further assistance, contact TRENDnet directly.
- Enter your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in your browser.
- Enter your router username and password. If you do not know your login credentials, contact the party who provided the router. This is normally your Internet Service Provider (ISP).
- Go to the Advanced Setup ▸ Port Forwarding.
- Find the forwarding rule for port 3389 and untick or delete it.
- Save your changes.
Enable Network Level Authentication
While this action addresses the immediate threat, it does not completely resolve the issue. The Network Inspector will continue to issue warnings unless you also enable Network Level Authentication, as explained below. You can resolve this issue by enabling Network Level Authentication on your PC. This ensures that any connection attempts must be authenticated before they can establish a session with the server.
Follow the steps below to enable Network Level Authentication on your PC:
- Click the Windows
Start button and select
Settings (the gear icon). 
- Select System in the left panel, then select the Remote Desktop tile.

- Click the arrow beside the Remote Desktop slider and tick the box next to Require devices to use Network Level Authentication to connect (Recommended).
